Fettlegenie.com provides the vital health and wellness information required for attaining vibrant health along with top health conditions and the most effective ways of healing them wholistically
RSS Feed

How can mold exposure contribute to ADD/ADHD symptoms?


Molds are various types of fungi that grow in filaments and reproduce by forming spores. The term mildew is sometimes used to refer to some kinds of mold, particularly mold in the home with a white or grayish color or mold growing in shower stalls and bathrooms. Mold may grow indoors or outdoors and thrives in damp, warm, and humid environments. Mold can be found in essentially any environment or season.

Toxic chemical exposure such as mold and mycotoxins can significantly affect brain function in children and adults. Mycotoxins are secondary metabolites of fungi, usually molds, which can cause injury to animals or humans. It has been shown that these effects may last for years after toxic exposure has ceased.

Exposure to toxins, including mold, can lead to significant long-lasting impairment of brain function, often inducing temporary to permanent disability. Case studies can be found @ http://www.ncbi.nlm.nih.gov/pmc/articles/PMC2998645/



Where can mold be found in homes?

The most common types of household mold that are found indoors include Cladosporium, Penicillium, Alternaria, and Aspergillus. Stachybotrys chartarum (also known as Stachybotrys atra and sometimes referred to as "black mold") is a greenish-black mold that can also be found indoors, although it is less common than the other types of mold found in homes. Stachybotrys grows on household surfaces that have high cellulose content, such as wood, fiberboard, gypsum board, paper, dust, and lint. There are types of mold that can grow on substances as different as foods and carpet.

Molds reproduce by forming tiny spores that are not visible to the naked eye. Mold spores are very hardy and can survive under conditions in which mold cannot grow, such as in dry and harsh environments. These spores travel through outdoor and indoor air. When the mold spores land on a surface where moisture is present, mold can then start to grow.

Outdoors, molds play a role in the decomposition of organic matter such as dead trees, compost, and leaves. They are most common in damp, dark areas or areas of decomposing plant life. Indoors, mold is often found in basements or shower stalls. Indoor mold has the potential to cause health problems and can destroy surfaces and objects where it grows.

What are the signs and symptoms of mold allergy?

Mold allergy symptoms and signs include :

* sneezing

* runny nose

* coughing

* wheezing

* watery eyes

* redness of the eyes

* itchy eyes

* skin irritation or rash

Which areas of life are affected by the existence of toxic mold?

The problem is that the existence of toxic molds not only includes residential and commercial area flood incidents, but also numerous minor water releases due to plumbing failures, conductive condensation, house water leaks and accidents.

What are the affects of toxic mold on the brain?

Toxic mold exposure has also been linked to more serious, long-term effects like memory loss, insomnia, anxiety, depression, confusion, trouble concentrating, and confusion.

How could toxic mold affect our health?

Mold has been linked to lung damage, brain damage, cancer and even death. Neurotoxins emitted by toxic mold growing inside of homes having water leaks can become toxic to the brain, causing not only a diagnosis of ADHD, but also misdiagnosis of Alzheimer’s disease, Lupus, MS, depression, anxiety, autonomic nervous system dysfunction, leaky gut syndrome, celiac disease, Chronic Fatigue Syndrome, and a host of other misdiagnoses.

Are environmental toxins overlooked during diagnosis of various neurological conditions?

Environmental toxins are commonly overlooked, and the patients are simply placed into a category of diagnosis which seems to best fit their symptoms. The patients symptoms are then treated with bandaid treatments for years even though the doctors have never been able to isolate the cause of the condition or symptoms, leading to routine misdiagnosis and never being able to provide the patient effective and corrective treatment.

How does toxic mold result in neurological conditions?

Once the toxins produced by toxic mold get into the brain, they also engage the HPA Axis, or the hypothalamus, pituitary and adrenal glands, forcing unregulated hormone and protein production. The results of these complex chemicals being produced may result in numerous conditions and diagnosis including ADHD, Dementia, and other neurological dysfunction.

How should people take action when diagnosed with any chronic illness?

When a person is diagnosed with a syndrome, or condition that requires maintenance based medication, they are making the decision to just give up and resign to the fact that this will be a lifelong condition, one they will have to live with. Sadly enough in many cases this is not true and with a little research and persistence many have found out what they had previously believed to be a lifelong condition is actually a treatable and curable condition.

Those who have been diagnosed with any chronic illness should look at their present and past environmental conditions whether at home or work, or school, and if indoor water damage was present at the time of their diagnosis, or shortly thereafter, they may be wise to seek a second opinion.

What is the best way to prevent mold in the home?

The best way to prevent mold in the home is the control of moisture. There are no EPA or government standards that have been established for mold or mold spore levels, so it is impossible to prove that a building or room is in compliance with any regulations concerning mold exposure.

Is it possible to prevent mold in the household?

The best way to prevent mold in the home is the control of moisture. Although it is impossible to eliminate all mold spores in an indoor environment, the mold spores will not grow in the absence of moisture, so controlling moisture is the key to preventing mold growth.

* Leaks in plumbing or other structures that lead to moisture buildup should be identified and repaired.

* Areas of leakage and water damage in the home should be cleaned and dried within 24-48 hours.

* Use of an air conditioner or air dehumidifier during humid seasons can help reduce the potential for moisture buildup.

* Avoid the use of carpets in humid basements and bathrooms.

* Using fans and maintaining good ventilation in the home can also help prevent or control dampness.

* Mold inhibitor products can be added to household paints.

* Keep indoor humidity low (ideally between 30%-50%).

* Use bathroom fans or open bathroom windows when showering.

* Appliances that produce moisture, such as clothes dryers and stoves, should be vented to the outdoors when possible.

* Adding insulation can reduce the potential for condensation on cold surfaces (such as windows, piping, roof, or floors).

Is it necessary to test for mold?

According to the U.S. Environmental Protection Association (EPA), if visible mold is present on inspection, testing is usually unnecessary. There are no EPA or government standards that have been established for mold or mold spore levels, so it is impossible to prove that a building or room is in compliance with any regulations concerning mold exposure. Likewise, the CDC does not recommend routine sampling and testing of mold in the home.

Tolerable or acceptable limits of mold exposure for humans have not been defined, and since individuals vary in their susceptibility to mold, testing cannot reliably predict the degree of health risks from any occurrence of mold.

When mold has previously been identified and cleanup procedures have been undertaken, sampling and testing may be carried out if necessary by qualified professionals to determine that adequate cleaning has occurred.

How to detect dangerous molds in your home?

Here are 7 ways to detect if your home has dangerous molds :

* Launch a search operation

Check whether there is a visible signs of mold growth in your home. Molds are characterized by its cotton-like features that may appear in colors such as gray, white, black, or green. Black mold can be especially dangerous so be sure to watch for any signs of this type of growth.

They also bear a resemblance to furry materials that give the impression of stains or yellowing stuff. Usually they can be found from the outside of construction materials or home furniture.

* Use your sense of smell

Whenever you smell some mold odors, begin your search immediately. But you also have to remember that even if your home has no moldy smell it doesn’t mean that you’re already free from its threat.

Be sharp-eyed because some fragrance-free molds are still toxic. Most of these species types grow in canals and in-between panels or dividing walls.

* Is basement flooding one of your indoor problems?

If yes, then there is a large probability that your house is filled with some dangerous molds. Rummage around for some indications of extra mustiness or water damage.

Also check if there are water discolorations on walls and ceilings. Remember excess amount of moisture is the major culprit for mold exposure.

* Windows mist over during winter

Winter season is characterized by coldness and generally when it’s cold, there is an excess in moisture. This excess amount of humidity in the environment can cause fungal growth which culminates the most in damp areas.

If this so happen, it is best to take precautionary measures to identify if there is really the presence of mold in the area. A house that is contaminated with fungi is more susceptible to further health issues.

* Use home mold test kits

Mold testing is seldom used to find out any dangerous threats of molds. These do-it-yourself test kits are designed to track down the presence of harmful molds that can trigger serious health problems.

Most of these testing devices are user-friendly and can provide reliable results in that instant. However, most health experts do not recommend testing for mold. They believe it is more reliable and practical to have visual inspections of molds in your homes.

* Molds that are hidden

Most experts agree that the most perilous mold is the one that is unseen such as in air conditioning units, duct-work, or with in walls. These molds can swell up rapidly while undetected. In most cases, hidden molds can be discerned not by eye but by the stale odor or the frequent need to clear your throat. Proper care and maintenance will typically prevent these.

* Ask a Certified Mold Inspector

In instances wherein you cannot really detect if there are molds inside your house, you can ask the assistance of licensed mold inspectors. They have the proper know-how in pinpointing the exact location of undetected mold problems.

All in all, the key to total prevention of the threats caused by mold problems is utmost awareness of the problem. Be vigilant with your surroundings for any sign of mold growth. Early prevention is the best solution to all the hazards set off by this microorganism.

Best Resources